| STYLE VARIATIONS: |
| No variations for this product |
Operating Instructions: Step 1: Open the canister cover. Make sure ignition knob is in "auto off" position and canister lever is in "off" position. Install the canister so that the canister hole is aligned with the canister guide. Lock by pushing the canister lever down and then close the canister cover. Step 2: Turn the ignition knob 90 degrees counterclockwise completely until you hear a "click" sound. If the the burner does not light, repeat the procedure. Step 3: The size of the flame can be regulated by turning the ignition knob slowly toward the "auto off" position from the "on" position. Step 4: Turn the ignition knob clockwise to "auto off" position to extinguish the flame. The flame is automatically put out and there is no gas supplied. Step 5: Raise the canister lever up to the "off" position. Open the canister cover and then take the canister out. Step 6: Some fuel may remain in the gas line after the unit has been turned of. For your safety, with the canister lever in "off" position turn the ignition know to the "on" position to burn off any remained fuel.
|